Replacing The Sas Expander Board; Preliminary Steps; Removing The Defective Sas Expander Board - Fujitsu PRIMERGY RX2520 M4 Upgrade And Maintenance Manual

7.4.10 Replacing the SAS expander board

Field Replaceable Unit
(FRU)
Tools: Phillips PZ2 / (+) No. 2 screw driver / hexagon screw driver 5 mm

7.4.10.1 Preliminary steps

"Locating the defective server" on page 45
Ê
"Suspending BitLocker functionality" on page 67
Ê
"Shutting down the server" on page 48
Ê
"Disconnecting the power cord" on page 49
Ê
"Getting access to the component" on page 50
Ê
"Removing the air duct" on page 61
Ê
"Removing the fan holder" on page 63
Ê

7.4.10.2 Removing the defective SAS expander board

Ê Remove the SAS expander board holder, see section
expander board holder" on page
Figure 91: Removing the installed SAS expander board (A)
Ê Remove the two screws (see circles).
RX2520 M4
Hard disk drive (HDD) and solid state drive (SSD)
177.
Upgrade and Maintenance Manual
Hardware: 10 minutes
"Removing the SAS
183