ECS P6VAP-Me Manual page 78

JP5: Supend-to-RAM jumper
Use this 3-pin jumper to enable the Suspend-to-RAM function.
Function
Enable Suspend-to-RAM
Disable Suspend-to-RAM
JP8: Set System Bus Frequency to 133 MHz
Use this 3-pin jumper to set the system bus frequency. In the normal
setting, the system automatically selects the correct frequency according
to the kind of processor installed. In the Force 133 MHz setting, the
system uses a 133 MHz system bus even if the processor is designed to
operate with a 66 or 100 MHz bus.
Function
Normal operation
Force 133 MHz
JP9: Set System Bus Frequency to 100 MHz
Use this 3-pin jumper to set the system bus frequency. In the normal
setting, the system automatically selects the correct frequency according
to the kind of processor installed. In the Force 100 MHz setting, the
system uses a 100 MHz system bus even if the processor is designed to
operate with a 66 or 133 MHz bus.
Function
Normal operation
Force 100 MHz
JP10: Automatic (BIOS) or Manual configuration
Use this 2-pin jumper to automatically (BIOS) or manually set the CPU
core voltage and system bus multiplier ratio. When set to manual
configuration, use the VID and BF jumpers to define proper
configuration. It is recommended that you set this jumper to automatic
configuration.
Function
Automatic configuration
Manual configuration
75
Jumper Cap
JP5
Short pins 1-2
Short pins 2-3 1 2 3
Jumper Cap
JP8
Short pins 1-2
Short pins 2-3
1 2 3
Jumper Cap
JP9
Short pins 1-2
1 2 3
Short pins 2-3
Jumper Cap
JP10
Short pins 1-2
Open pins 1-2
1 2