ECS P6VAP-Me Manual page 57

AGP Aperture Size (MB)
This item defines the size of the aperture if you use an AGP graphics adapter. It
refers to a section of the PCI memory address range used for graphics memory.
We recommend that you leave this item at the default value.
AGP 4X Mode
This item allows you to improve video performance by quadrupling the speed of
the AGP bus. This function is supported by the mainboard, so we recommend
that you set this item to enabled.
AGP Driving Control
??? set auto or manual
AGP Driving Value
When the previous item AGP Driving Control is set to manual, you can define
use this item to ???
CPU to PCI Write Buffer
When this item is enabled, writes from the CPU to the PCI bus are buffered to
compensate for the different speeds of the CPU and PCI buses. Leave this item
at the default value.
PCI Dynamic Bursting
PCI Master 0 WS Write
PCI Delay Transaction
PCI#2 Access #1 Retry
These items determine how the system carries out read/write operations over the
PCI bus. These items are normally optimally determined by the system's
hardware and chipset, so we recommend that you leave these items at the
manufacturers default.
AGP Master 1 WS Write
AGP Master 1 WS Read
These two items determine how the system carries out read/write operations
over the AGP bus. These items are normally optimally determined by the
system's hardware and chipset, so we recommend that you leave these items at
the manufacturers default.
In Order Queue Depth
???
P6 Lock Function
???
Memory Parity/ECC Check
If this item is enabled it allows the system to use parity checking and ECC (Error
Correcting Code) to catch errors in the system memory. Enabling this item might
have an impact on overall system performance.
54
Default: 64 MB
Default: Enabled
Default: Auto
Default: DA
Default: Enabled
Default: Enabled
Default: Enabled
Default: Disabled
Default: Enabled
Default: Disabled
Default: Disabled
Default: 4
Default: Disabled
Default: Disabled