Check The Jumper Settings - ECS P6VAP-Me Manual

Check the Jumper Settings

Check all the mainboard jumpers to ensure that the board is configured
correctly.
JP11 JP6
JP2
VID
JP10
JP1: Clear CMOS Memory Jumper
This jumper lets you erase the system setup settings that are stored in
CMOS memory. You might need to erase this data if incorrect settings
are preventing your system from operating. To clear the CMOS memory,
turn off the system, disconnect the power cable from the mainboard, and
short the appropriate pins for a few seconds.
JP1 1
Function Jumper Cap
Normal Operation Short pins 1-2
2
Clear CMOS Short pins 2-3
3
19
JP3
JP7
JP4
JP5
JP8
JP1
JP12
JP9
BF