ECS P6VAP-Me Manual page 56

Bank 0/1 DRAM Timing
Bank 2/3 DRAM Timing
This item allows you to set the speed of the memory used in the DIMM slots.
SDRAM Cycle Length
This item controls how often the data in memory will be accessed. You can set
the value to 2 or 3 clock cycles.
DRAM Clock
This item lets you set the speed of the system memory bus. You can set this
item to follow the host clock, or to under/over perform the host bus by plus or
minus 30 MHz. We recommend that you leave this item at the default value.
Memory Hole
This item can be used to reserve memory space for some ISA expansion cards
that require it.
P2C/C2P Concurrency
Use this item to enable or disable concurrent memory/PCI and CPU action.
Fast R-W Turn Around
This item sets a timing parameter for CPU access. Since the CPU timing is
determined by the system hardware, you can set this item to Disabled.
System BIOS Cacheable
Video RAM Cacheable
These items allow the video and/or system BIOS to be cached in memory for
faster execution. We recommend that you leave these items at the default value.
Default: SDRAM 10ns
Default: SDRAM 10ns
Default: 3
Default: Host CLK
Default: Disabled
Default: Enabled
Default: Disabled
Default: Enabled
Default: Disabled
53