ECS P6VAP-Me Manual page 62

Power Management
This item acts like a master switch for the power-saving modes and hard disk
timeouts. If this item is set to Max Saving, power-saving modes occur after a
short timeout. If this item is set to Min Saving, power-saving modes occur after a
longer timeout. If the item is set to User Define, you can insert your own timeouts
for the power-saving modes.
HDD Power Down
If you have selected User Define for the Power Management item, you can set
this item to a selection of timeouts from 1 to 15 minutes. The hard disk drive will
power down if the selected timeout passes without any activity on the hard disk.
Doze Mode
Suspend Mode
If you have selected User Define for the Power Management item, you can set
this item to a timeout between 1 Min to 1 Hour. The system will go into the
power-saving doze or suspend mode if the timeout passes without any system
activity.
Press Esc to close the Power Management sub-menu and return to the Power
Management Setup page.
ACPI Suspend Type
Use this item to define how your system suspends. In the default, S1(POS), the
suspend mode is equivalent to a software power down. If you select S3 (STR),
the suspend mode is a suspend to RAM – the system shuts down with the
exception of a refresh current to the system memory.
Video Off Option
This option defines how and when the video is powered down if the system is put
into suspend mode.
Default: User Define
Default: Disabled
Default: Disabled
Default: Disabled
Default: S1 (POS)
Default: Suspend → Off
59