Add-In Card Options - ECS P6VAP-Me Manual

Add-in Card Options

The mainboard has some features that can be used by some types of
add-in cards.
WOL1: Wake on LAN
If you have installed a network adapter (LAN adapter), you can use the
cable provided with the card to plug into the WOL1 connector on the
mainboard. This is the Wake On LAN feature, When your system is in a
power–saving mode, any traffic through the network will automatically
resume the system. You must enable this item using the Power
Management page of the setup utility. See Chapter three for more
information.
WOM1: Wake on Modem
If you have installed a fax/modem add-in card, you can use the cable
provided with the card to plug into the WOM1 connector on the
mainboard. This is the Wake On Modem feature, When your system is in
a power–saving mode, an incoming call will automatically resume the
system. You must enable this item using the Power Management page
of the setup utility. See Chapter three for more information.
WOM1
WOL1
38