ECS P6VAP-Me Manual page 25

JP5: Suspend-to-RAM Jumper
Use this 3-pin jumper to enable the Suspend-to-RAM feature. In a
Suspend-to-RAM condition, the contents of the system's memory is held
intact, while practically all other components are turned off completely or
slowed down to reduce power consumption.
JP5
Function
Enable Suspend-to-RAM
Disable Suspend-to-RAM
1 2 3
JP8: Set System Bus Frequency to 133MHz
Use this 3-pin jumper to set the system bus frequency. In the normal
setting, the system automatically selects the correct frequency according
to the kind of processor installed. In the Force 133 MHz setting, the
system uses a 133 MHz system bus even if the processor is designed to
operate with a 66 or 100 MHz bus.
Function
Normal Operation
Force 133 MHz
JP9: Set System Bus Frequency to 100MHz
Use this 3-pin jumper to set the system bus frequency. In the normal
setting, the system will automatically select the correct frequency
according to the kind of processor installed. In the Force 100 MHz
setting, the system will use a 100 MHz system bus even if the processor
is designed to operate with a 66 or 133 MHz bus.
JP9
Function
Normal Operation
Force 100 MHz
1 2 3
21
Jumper Cap
Short pins 1-2
Short pins 2-3
Jumper Cap
Short pins 1-2
Short pins 2-3
Jumper Cap
Short pins 1-2
Short pins 2-3
JP8
1 2 3