Majestic Quartz Series Installation Manual page 63

3. LOG #3: Locate and install Log #3 by installing the
"right" end of the log over the left burner pin and
pressing "down" to engage log pin. See Figure 2 for
log pin locations. Rotate Log #3 counterclockwise
until it contacts the ember tray tab as shown in Figure
5.
3
EMBER TRAY TAB EMBER TRAY TAB
Figure 5 Install Log #3
4. LOG #4: Locate and install the Log #4 by installing the
"left" end of the log over the right log pin and pressing
"down" to engage the log pin. See Figure 2 for log pin
locations. The face of the log should contact the right
ember tray tab. See Figure 6.
2
EMBER TRAY TAB EMBER TRAY TAB
Figure 6 Install Log #4
Majestic • QUARTZPLA36IN / QUARTZPLA36IL Installation Manual • 2643-980 Rev. B • 7/22
2
1
4
5. Locate the glowing embers and install them as shown
in Figure 2. Do not install any glowing embers on the
back row of burner ports. Glowing Embers can be
placed directly over burner ports. However, for optimal
front flame height place embers around burner ports.
WARNING! Risk of Explosion! Follow ember placement
instructions. Replace ember material annually. Improperly
placed embers interfere with proper burner operation.
VOIDS FOR LOG #6 VOIDS FOR LOG #6
1
3
Figure 7 Embers Installed
6. LOG #5: Locate and install Log #5. This log does not
have any "burn out" features painted on the log. The
"left" end of this log will rest on the base pan and the
"right" end will rest on the "left" end of Log #1. See
Figure 8.
1
5
3
Figure 8 Install Log #5
2
4
2
4
63