Appliance Location And Clearances To Combustibles - Majestic Quartz Series Installation Manual

C. Appliance Location and Clearances to
Combustibles
When selecting a location for the appliance it is important
to consider the required clearances to walls and allow suf-
ficient clearance for heat management systems venting.
See Figure 3.4 and Figure 3.5.
WARNING! Risk of Fire or Burns! Provide adequate
clearance around air openings and for service access.
Due to high temperatures, the appliance should be lo-
cated out of traffic and away from furniture and draperies.
NOTICE: Illustrations reflect typical installations and are
FOR DESIGN PURPOSES ONLY. Illustrations/diagrams
are not drawn to scale. Actual installation may vary due to
individual design preference.
K
E
A
I
L
Models
QUARTZPLA36IN
QUARTZPLA36IL
Figure 3.4 Appliance Locations
Majestic • QUARTZPLA36IN / QUARTZPLA36IL Installation Manual • 2643-980 Rev. B • 7/22
12
A
C
Refer to Section 10 for mantel and wall
projection information.
Consider the mantel or cabinet system to be
installed and comply with the necessary
requirements for elevated hearth. Refer to
instructions included with cabinet system.
NOTICE: Additional clearances are required for
systems installations. Provisions must be made in advance to ensure
fit within the framing.
J
I
A B C
in. 45-1/2 42 64-3/8
mm 1156 1067 1635
NOTICE: Allow 13 inches minimum clearance
on side(s) of appliance for venting of heat
management system.
Figure 3.5
D
B
H
E
D F
Min.
See Section 1/2 45-1/2
10 for Mantel
13 1156
Projections
13 IN. MIN.
Clearance for Heat Management System
heat management
F
G H I J
64-3/8 16-1/4 48-1/2 68-3/4
1635 413 1232 1746
F
K L
16-5/8 7-1/2
422 191