Decorative Barrier Front Dimensions For Finishing - Majestic Quartz Series Installation Manual

D. Decorative Barrier Front Dimensions for
Finishing
Only decorative barrier fronts certified for use with this
appliance model may be used. Contact your dealer for
a list of decorative barrier fronts that may be used. Once
you have determined what kind of decorative barrier front
and finishing material is going to be used on the fireplace,
you may use the table below which shows the decorative
barrier front models and the finishing material thickness
allowed.
MODEL and TEMPLATE PART #
FRONT FIT
DBM36 Inside
Overlap
CRD36
Inside
Table 1. Finishing Clearances for CRD36 and DBM36 Fronts
DECORATIVE BARRIER FRONT
NON-COMBUSTIBLE
FINISHING MATERIAL
6 IN. MAXIMUM THICKNESS
Stop non-combustible finishing material flush with appliance
surround opening.
Figure 10.9 Overlap Fit Decorative Barrier Front (DBM36)
FRONT FACE OF FIREPLACE
DECORATIVE BARRIER FRONT
Non-combustible finishing materials 1 in. maximum thick.
Stop non-combustible finishing material flush with opening.
Figure 10.10 Overlap Fit Door (CRD36)
Majestic • QUARTZPLA36IN / QUARTZPLA36IL Installation Manual • 2643-980 Rev. B • 7/22
60
FINISH MATERIAL THICKNESS
6 inch max.
1 inch max.
1-6 inch max.
NON-COMBUSTIBLE
FINISHING MATERIAL
6 IN. MAXIMUM THICKNESS
1 in. MAX
NON-COMBUSTIBLE
FINISHING MATERIAL
(TOP EDGE)
NON-COMBUSTIBLE
FINISHING MATERIAL
6 IN. MAXIMUM
THICKNESS
SEE
FIGURE
10.9
10.10
10.11
(Includes 1/8 in. opening each side of decorative barrier front)
Non-combustible finishing material between 1 and 6 in. thick.
Figure 10.11 Inside Fit Decorative Barrier Front (CRD36)
NON-COMBUSTIBLE
FINISHING MATERIAL
DECORATIVE BARRIER FRONT
37-3/8
949 mm
6 IN. MAXIMUM
THICKNESS
34-7/16
951 mm