Error Codes - Omron SYSMAC CS1W-CLK11 Operation Manual

Error Log
9-3-2

Error Codes

Error Contents
code
0001 PC watchdog timer error
Hex
0002 PC service monitor error
Hex
0003 PC shared RAM error
Hex
0004 CPU Bus Unit ID number error
Hex
0005 Unit number error
Hex
0006 CPU Unit error
Hex
000D PC model error
Hex
000E I/O Bus error
Hex
000F PC initialization error
Hex
0010 PC Setup exceeds capacity
Hex
0011 PC initialization error
Hex (Time out)
0012 CPU Unit memory error
Hex
0013 CPU Unit write-protected
Hex
252
The following table lists the error codes (in 4-digit hexadecimal) and the con-
tents of the errors.
Detail code
1st byte 2nd byte
00 Hex 00 Hex
Monitor time (unit: ms)
01 Hex: 00 Hex
Cyclic
02 Hex:
Event
04 Hex:
CPU bus link
00 Hex 00 Hex
Unit set The value
value recognized
by the CPU
Unit
Bit 11: No relevant Unit in
I/O table.
Bit 12: Hardware test unit
number recognized.
Bit 13: Incorrect unit num-
ber.
Bit 14: Duplicated unit
number.
Not set
00 Hex fixed 00 Hex fixed Check the operating
01 Hex: 01 Hex:
Read error Data link
02 Hex: table
Write error 02 Hex: Net-
work param-
eters
03 Hex:
Routing
table
04 Hex: PC
Setup Area
Correction Written to
EEPROM
Replace PC's CPU Yes
Unit.
Check operating Yes
environment.
Check operating Yes
environment.
Check I/O Yes
Connecting Cables.
Check the Unit Yes
number setting. Rec-
reate the I/O table.
Check the Unit num- Yes
ber settings. Recre-
ate the I/O table.
Refer to 1-2-4 Con- Yes
troller Link Unit Mod-
els and PCs and PCs
and check the PC
model.
Yes
environment.
Check the operating Yes
environment.
Reduce the number Yes
of CPU Bus Units
mounted on each
CPU Unit by one.
Check the operating Yes
environment.
Reset the appropri- Yes
ate data.
Release the CPU Yes
Unit write protect.
Section 9-3
Applicable
PC
All
CV, CS/CJ
CV
CV, CS/CJ
CV
CV, CS/CJ
C200HX/HG/
HE
CS/CJ
CS/CJ
CS/CJ
CS/CJ
CS/CJ
CS/CJ