Table of Contents
Advertisement
1. GND (Ground) Green
2. N (Neutral) White
3. L2 Red
4. L1 Black
6.0 – Load (AC Output) Connection
6.1 – Preparation
WARNING!
TO USE APPROPRIATELY SIZED WIRE FOR AC CONNECTION. NOT DOING SO WILL
VIOLATE THE TERMS OF THE WARRANTY. DO NOT CONNECT THE UTILITY TO "AC OUTPUT
CONNECTION (LOAD CONNECTOR)." ALL CONNECTIONS SHOULD BE IN ACCORDANCE
WITH THE BELOW INSTRUCTIONS. NOT DOING SO WILL VIOLATE THE TERMS OF THE
WARRANTY.
CAUTION!
MINUTES TO RESTART TO HAVE ENOUGH TIME TO BALANCE REFRIGERANT GAS
INSIDE OF CIRCUITS. IF A POWER SHORTAGE OCCURS AND RECOVERS IN A
SHORT TIME, IT MAY CAUSE DAMAGE TO YOUR CONNECTED APPLIANCE. TO
PREVENT THIS KIND OF DAMAGE, PLEASE CHECK MANUFACTURER OF AIR
CONDITIONER TO CONFIRM THAT IT IS EQUIPPED WITH TIME-DELAY FUNCTION
BEFORE INSTALLATION. OTHERWISE, INVERTER/CHARGER WILL TRIGGER
OVERLOAD FAULT AND CUT OFF OUTPUT TO PROTECT THE APPLIANCE. THIS MAY
STILL RESULT IN DAMAGE TO THE AIR CONDITIONER OVER TIME.
© SIMPLIPHI POWER
4
IT'S VERY IMPORTANT FOR SYSTEM SAFETY AND EFFICIENT OPERATION
APPLIANCES SUCH AS AIR CONDITIONERS REQUIRE AT LEAST 2~3
| 15 |
3
2
1
REV2022007071630
Advertisement
Table of Contents
