Table of Contents
Advertisement
12.9– Touchable Function Keys
Function Key
Enter/ON
ESC/OFF
Up
Down
+
© SIMPLIPHI POWER
Icon flashing alerts PV input voltage is out of range
Icon flashing alerts utility voltage or frequency is out of range
Battery State of Charge indicator
Icon flashing indicates battery is not allowed to discharge
Warning! When flashing, the battery voltage is too low
AC output for loads is permitted and inverter is providing
power to the connected loads
AC output for loads is allowed but there is no power provided
from inverter. Only PV power is present but is not able to
provide power to the connected loads
Overload
Parallel operation is working
Operation
Quick Touch
POWER ON: Touch and
hold the button for
approximately 1 second
when the utility is detected
or 3 seconds without the
utility
Quick Touch
POWER OFF: Touch and hold
the button until the buzzer
continuously sounds
Quick Touch
Quick Touch
Touch and hold these two
buttons for 2 seconds
| 37 |
Function
Enter query menu
If it's in query menu, touch this
button to confirm selection or
entry
Turns on inverter to provide
power to connected loads via AC
output connector
Return to previous menu
Turn off power to the loads
Select last selection or increase
value
If in query menu, press this
button to jump to next selection
or decrease value
Not in query mode, mutes alarm
in standby mode or battery mode
Enter setting mode
REV2022007071630
Advertisement
Table of Contents
