Table of Contents
Advertisement
1.0 – Introduction
1.1 – Online Resources
The Product Documentation section of SimpliPhi's web site
documentation/)
includes Specification Sheets, Warranties, Installation & Operator's Manuals, and Integration
Guides for all SimpliPhi's current and legacy products.
SimpliPhi's YouTube channel
instructional videos showing various steps of the battery installation process in detail.
1.2 – Technical Support
SimpliPhi Technical Support (805-640-6700 x 1, ESSTech@basco.com) is available to take any questions
regarding this manual or general installation questions. For assistance with battery system commissioning,
SimpliPhi asks that a commissioning call be scheduled ahead of time with Technical Support.
We encourage you or your installer to contact SimpliPhi with any questions. We are committed to working with
you and your installation team to achieve a safe, reliable storage system that will provide years of maintenance-
free service that is covered by our Warranty terms & conditions.
1.3 – Product Overview
The SimpliPHI Hybrid Inverter is designed to provide continuous
power from PV solar arrays, batteries, generators and the grid.
When MPPT input voltage of the solar array is within acceptable
range (see specification for the details), the SimpliPHI Inverter is
able to generate power to feed the grid (utility) and charge the
batteries. The SimpliPHI Inverter is an all-in-one inverter that
incorporates dual MPPT inputs for solar without the need for a
charge controller, a battery charger, or integrated AC transfer
switch. It is designed to integrate and optimize multiple AC
generation sources such as the grid and generators for battery
charging and powering loads.
See Figure 1 for a simple diagram of a typical solar system.
2.0 –Safety
For safety reasons, read all instructions and cautionary markings on the SimpliPHI Inverter, and all appropriate
sections of this manual. Failure to follow instructions provided in the Installation Manual, Integration Guides
and/or Warranty will Violate the terms of the Warranty.
2.1 – General Safety Instructions
•
Do not operate if the SimpliPHI Inverter has been damaged in any way during shipping or otherwise.
•
To reduce the chance of short-circuits, always use insulated tools when installing or working with
SimpliPHI inverters or other electrical equipment.
•
Remove personal metal items such as rings, bracelets, necklaces, and watches when working with
SimpliPHI inverters and electrical equipment. Wear insulated gloves and rubber shoes.
•
SimpliPHI Inverters pose some risk of shock or sparking during the installation and initial wiring and
connection process. This is consistent with all other solar and battery-based system formats. To
minimize the risk of shock or sparks during the installation and commissioning of the system, make
sure the disconnect and load breakers are in the "OFF" position.
© SIMPLIPHI POWER
(https://www.youtube.com/channel/UCcuCaLT_G3Hhumteh-pI5yg/videos)
| 9 |
(https://simpliphipower.com/product-
F
1: S
IGURE
has
O
YSTEM
VERVIEW
REV2022007071630
Advertisement
Table of Contents
