Table of Contents
Advertisement
only operated between two working logics based on defined peak start and end times to
optimize energy usage.
In the Grid-Tie with Backup mode, users can configure the PV power supply priority, charging source
priority, and load supply source priority. See additional settings in Section 12.3.
•
Grid-Tie: PV power can only feedback to grid. Battery charging is not active.
•
Off-Grid: PV power only provides power to the loads and charges battery. PV to the grid is
deactivated.
o
Off-Grid (I)
o
Off-Grid (II)
o
Off-Grid (III)
12.2 – Selecting Grid Profile
Please select the grid standard applicable to your region. The default setting for the inverter is North
American standard IEEE1547.2.
Nominal Output Voltage: 120/240V
WARNING!
THE INVERTER AND WILL VIOLATE THE TERMS OF THE WARRANTY.
12.3 – AC Battery Charging Profiles
Based on the operations chosen in Section 12.2, the set-up window may show different operations.
These modes can be established in display programming (Steps 13-26)
Allow AC Charging Duration: This establishes a period of time to allow AC (Grid) to charge the
batteries.
•
If duration is set to 0:00 – 0:00, a time limitation for AC to charge the battery has not been
established.
AC Output ON/OFF Timer: This sets up the on/off time for AC Output of the inverter.
•
If setting is 0:00 – 0:00 the setting is disabled.
Allow to Charge Battery: This option is automatically determined by setting in "Charging source". You
cannot modify the setting from this screen.
•
When "NONE" is selected in the charging source section, this option becomes unchecked as grey
text.
Allow AC to Charge Battery: This option is automatically determined by setting in "Charging source". You
cannot modify the setting from this screen.
•
When "Grid and PV" or "Grid or PV" is selected in charging source section, this option is by default
selected.
•
Under Grid-Tie mode, this option is invalid.
Allow to Feed-In to the Grid: This option is only valid under Grid-Tie and Grid-Tie with Backup modes.
© SIMPLIPHI POWER
SELECTING THE WRONG SETTING CAN CAUSE DAMAGE TO
| 28 |
Output Frequency: 60Hz
REV2022007071630
Advertisement
Table of Contents
