Briggs & Stratton SIMPLIPHI Installation Manual page 41

Charger source
priority
15
Feed to grid
16
function
Battery feed to
grid function
17
when PV is
available
Battery feed to
grid function
18
when PV energy
is unavailable.
Load supply
19
source (PV is
available)
Load supply
source (PV is
20
unavailable)
© SIMPLIPHI POWER
Only Solar PV is only available to charge the battery.
Grid cannot charge the battery.
None No charging is allowed via grid or PV
power. This setting should not be used if
batteries are in the system.
Feed to Grid Feed to grid enabled
Disabled (default)
Battery feed to grid Battery feed to grid enabled
disabled (default)
Battery feed to grid Feed to grid enabled
disabled ( default)
SUB (default) Solar-Grid-Battery:
PV will provide power to the load first. If it is
not sufficient, grid will provide power to the
load. If grid is not available, then the battery
will provide power to the load.
SBU Solar-Battery-Grid:
PV will provide power to the load first. If it's
not sufficient, the battery will provide power to
the load. When battery is low or not available,
the grid will back up the load.
UB (default) Grid-Battery:
Grid will provide power to the load first. If grid
is not available, then the battery will
provide power to the loads.
BU Battery-Grid:
Battery will provide power to the load first. If
the battery is low or unavailable, grid will back
up the load. This setting is ineffective during
AC charging.
| 41 |
REV2022007071630