Skoda Fabia II 2007 Workshop Manual page 28

Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
Gearbox 0AM-DSG - Edition 01.2015
❑ Removing and installing
4 - Gearbox input r.p.m. sender - G182-
❑ Fitting location ⇒ page 25
❑ is checked by self-diagnosis
❑ is a component and can only be removed and installed with the° mechatronics for double clutch gearbox
- J743- ⇒ "1 Mechatronics for double clutch gearbox J743 ", page 77
5 - Mechatronics for double clutch gearbox - J743-
❑ Fitting location ⇒ page 24
❑ is checked by self-diagnosis
❑ Removing and installing
6 - Selector lever lock solenoid - N110-
❑ Fitting location ⇒ page 25
❑ is checked by self-diagnosis
7 - Selector lever - E313- with Tiptronic switch - F189- , selector lever sensor control unit - J587- and selector
lever switch locked in P - F319-
❑ Fitting location ⇒ page 25
❑ is checked by self-diagnosis
❑ Tiptronic switch - F189- , selector lever sensor control unit - J587- and selector lever switch locked in P
- F319 - are integrated into the shift mechanism.
❑ these components cannot be replaced separately; the removal and installation procedure is only possible
together with the gearshift mechanism
⇒ "2.8 Removing and installing shift mechanism with selector lever control cable", page 118
8 - Brake light switch - F- and brake pedal switch - F47-
❑ Fitting location ⇒ page 26
❑ Signal transfer from engine control unit to gearbox control unit via CAN databus
❑ is checked by self-diagnosis
❑ removing and installing ⇒ Chassis; Rep. gr. 46
9 - Kick-down switch - F8-
❑ Fitting location ⇒ page 26
❑ Signal transfer from engine control unit to gearbox control unit via CAN databus
❑ is checked by self-diagnosis
❑ Removing and Installing ⇒ Engine; Rep. gr. 20
Mechatronics for double clutch gearbox - J743-
Fitting location: The mechatronics for double clutch gearboxes -
J743- is screwed onto the front gearbox housing.
The control unit is firmly integrated in the mechatronics for double
clutch gearbox - J743- .
The senders and the actuators are located in the mechatronics
for double clutch gearbox - J743- . Further information can be
found in ⇒ Self-study programme No. 75 ; Automatic gearbox
DSG - 0AM .
Removing and installing the mechatronics for double clutch gear‐
box - J743-
⇒ "1 Mechatronics for double clutch gearbox J743 ", page 77
24
Rep. gr.00 - Technical data
⇒ "2.5 Removing and Installing the cover for the shift mechanism", page 109
⇒ "1 Mechatronics for double clutch gearbox J743 ", page 77
.