Rear Panel - Pentax EPK-i Owner's Manual

Rear Panel

Y/C OUT
(Video/Printer Outputs)
These connectors (separated video
outputs) are for outputting separate
video signals (video signals
separated into luminance signals
and color signals) to send to a
monitor or printer image processor.
RGB (Video/Printer Outputs)
These connectors are for
outputting video signals (RGB color
signals and synchronous signals)
to send to a monitor or printer
image processor.
DVI
This connector is for DVI or VGA.
SERIAL OUT1 DV
This connector is for
outputting video signals
to send to DV equipment.
KEYBOARD
This connector is for
connecting a keyboard.
You can connect either
the supplied keyboard
designed specifically for
use with the processor or
a commercially available
keyboard (US layout).
SA-P2
This connector is for connecting
the SA-P2 water supply system.
FTSW
This connector is for connecting
foot switches (OS-A61) for
operating peripheral devices.
CONTROL
These connectors are for when you
want to operate peripheral devices
remotely.
RS232C
This connector (D-sub 9-pin
connector) is for connecting an
external output device. It is an RS-
232C compliant interface.
VIDEO IN
(Composite Video Input)
This connector (BNC connector) is
for inputting composite video
signals to display on the touch
panel.
VIDEO OUT (Video Output)
This connector (BNC connector) is
for outputting composite video
signals to send to a monitor or
image processor.
AUDIO IN (DV)
This connector is for inputting audio
signals to send to DV equipment.
Rating Plate
This plate shows the processor
rating specifications, acquired
standards, etc.
Fuse Box
This fuse box contains
two fuses.
Potential
Equalization Terminal
This terminal is used
with a potential
equalization busbar to
equalize the potential of
other equipment
connected to the
processor.
Power Input Socket
Connect the AC power cord.
Ventilation
Note
Install the processor in a location
where the ventilation grid will not
be blocked.
RJ45
This connector is exclusively for
communication.
SERIAL OUT3/4
These connectors are for
outputting the digital data of still
images.
Names and Functions of Parts
1
9