Table of Contents
Advertisement
3-1-3
Rear panel
No. N ame
RGB Video Output
Interface Connector
Keyboard Connector
Separated Video
Output
Composite Video
Output
Control
Lamp Life Meter
Breaker
Power Input Socket
Rating Plate
NOMENCLATURE, CONTROLS AND FUNCTIONS
Y / C-OUTPUT
RGB OUTPUT
RGB OUTPUT
RS-232-C
CONTROL1
KEY BOARD
F unction
NTSC or PAL RGB video out connectors, 9-pin D-sub female connectors.
For RS-232C interface.
Accepts the keyboard supplied by Pentax.
Y/C video out connector (4-pin S connector), two (2) outputs on rear panel
NTSC or PAL composite video out connector, BNC type connector, two (2) outputs on rear panel.
Is activated by either the endoscope control buttons (C, V) or the processor front panel copy switch to control
peripherals.
Indicates hours for (Metal Halide) lamp installed in video processor. The lamp life meter should be replaced when the
(Metal Halide) lamp is replaced.
Activates with a red button protruded out when abnormal current flows.
CAUTION - When the circuit breaker is activated, try first to reset. If the circuit breaker is activated again, when the pro-
cessor is turned ON, do NOT use the processor and return it to Pentax.
Accepts AC power cord.
Displays unit model number, serial number, power requirements.
Y / C-OUTPUT
VIDEO
VIDEO
CONTROL2
LIFE METER
BREAKER (S) 2A
VIDEO PROCESSOR
MODEL EPKC-700P
ASAHI OPTICAL CO., LTD.
INPUT XXXXXXXXX
MADE IN JAPAN
SERIAL NO.
WARNING
FOR CONTINUED PROTECTION AGAINST FIRE HAZARD,
REPLACE ONLY WITH SAME TYPE AND RATING OF FUSE.
11
Advertisement
Table of Contents
