Rear Panel - Pentax EPK-1000 Owner's Manual

(3) REAR PANEL

No. NAME
1 Keyboard Connector
2 Interface Connector
3 Serial Bus
4 Control
5 RGB Video Output
6 Separated Video Output
7 Composite Video Output
8 Power Input Socket
9 Breaker
10 Potential equalization terminal For safety purposes, this terminal is connected to a potential equalization busbar of the
11 Rating Plate
FUNCTION
accepts the keyboard supplied by PENTAX.
RS-232C serial interface connector.
NTSC or PAL Serial Digital Video out connector for a still-frame video image .
is activated by either the endoscope control buttons (C, V) or the keyboard copy key to
control peripherals.
NTSC or PAL RGB video out connectors, 9-pin D-sub Female connectors.
Y/C video out connector (4-pin S connector)
NTSC or PAL composite video out connector, BNC type connector.
accepts AC power cord.
activates with a red button sticked out when abnormal current flows.
CAUTION
-When the breaker is activated, try to reset first. If the breaker activates
again when the processor is turned ON, do NOT use the processor and return it to
PENTAX.
electrical installation.
displays unit model number, serial number and power requirements.
9