Operation Panel - Pentax EPK-i Owner's Manual

Operation Panel

1
XLUM Button S
Use this button to maximize
the light intensity of the
scope.
I“"XLUM On/Off Button”"
(P.24)
Brightness
Use UV to adjust
the level of
brightness.
I“"Brightness
Buttons”" (P.25)
Color Balance
Use UV to adjust the
blue and red color tones.
I“"Color Balance Buttons”"
(P.25)
NOTE
The lamp life is 400 hours. Check the LIFE indicator (lamp life indicator) on the touch panel before you use the processor.
Replace the lamp cartridge if 1 red bar is displayed on the LIFE indicator.
I“"Replacing the Lamp Cartridge”" (P.45)
8
Names and Functions of Parts
Exposure Control Button
Y
Use this button to change the
method of adjusting the screen
brightness.
AUTO: Adjust the screen
brightness
automatically.
MANUAL: Adjust the screen
brightness
manually.
I“"Exposure Control Button”"
(P.24)
Customize Button 1/2/3
Use these buttons to set the
functions displayed on the
buttons.
You can assign the functions
you use very frequently to
these three buttons.
I“"Customize Buttons”"
(P.25)
Touch Panel
This is a touch panel LCD display.
Press buttons and menu items to
configure settings.
I“"Operation Panel and Touch
Panel Operations”" (P.22)
Measuring Method Button
Z
Use this button to change the
measuring method.
AVE: Measure based on
the average
brightness value for
the whole screen.
PEAK: Measure based on
the maximum
brightness value for
the screen.
I“"Measuring Method
Button”" (P.24)
BALANCE
Set up Button
Use this button
to display the Set
up menu
I“"Set up
Button”" (P.25)
Lamp Life Indicator [LIFE]
The lamp usage time is indicated by
this indicator.
Less than 300 hours: 3 green bars
300 hours to 399 hours: 2 green
bars
400 hours or more: 1 red bar
If the time is 400 hours or more, 1
bar of the indicator lights red, and
the [Please replace the lamp]
message is displayed on the
monitor, replace the lamp cartridge.
I“"Replacing the Lamp Cartridge”"
(P.45)
LAMP Switch J
Use this switch to turn the
lamp on or off.
I“"LAMP Switch”"
(P.23)
LAMP
PUMP Switch Q
PUMP
Use this switch to operate
or stop the air/water
pump.
I“"PUMP Switch”"
WHITE
(P.23)
WHITE BALANCE
Switch N
Use this switch to adjust the
white balance.
I“"WHITE BALANCE
Switch”" (P.23)
Air Flow
Use UV to adjust
the volume of the pump.
I“"Air Flow Buttons”"
(P.25)