Denon AVC-X3700H Owner's Manual page 59

Contents
Connecting 7.1-channel speakers: Bi-amp connection of front speakers
This system plays back 7.1-channels. You can use the bi-amp connection for front speakers. Bi-amp connection is a method to connect separate
amplifiers to the tweeter terminal and woofer terminal of a speaker that supports bi-amplification. This connection enables back EMF (power returned
without being output) from the woofer to flow into the tweeter without affecting the sound quality, producing a higher sound quality.
You can connect speakers for up to 9-channels for MAIN ZONE. When you connect speakers for 8 or more channels, the output speakers automatically
switch according to the input signal and sound mode.
(Bi-Amp)
SL
SBL
NOTE
0 When making bi-amp connections, be sure to remove the short-circuiting plate or
wire between the speaker's woofer and tweeter terminals.
Front panel
Downloaded from ManualsNet.com
Connections Playback
FHL FHR
FL FR
(Bi-Amp)
SW C
SR
SBR
Display Rear panel
search engine
Settings
FRONT FRONT CENTER SURROUND
SW C SR
(R)
q w
FR
z The height speakers, ceiling speakers and Dolby Atmos Enabled speakers can
be connected to the HEIGHT1 speaker terminals. Set the speaker to be
connected from "Height" - "Layout" in the menu. (v p. 209)
59
Remote
Tips Appendix
SURROUND SURROUND BACK SURROUND BACK HEIGHT1 HEIGHT1 HEIGHT2
ASSIGNABLE
SPEAKERS
z z
SL SBR SBL FHR FHL
(L)
q w
FL
Index
HEIGHT2
ASSIGNABLE