Denon AVC-X3700H Owner's Manual page 220

Contents
Front Speaker
Set the front speaker A/B to use for every sound mode.
A
(Default):
B :
A+B :
0 This can be set when "Assign Mode" is set to "7.1ch + Front B". (v p. 207)
Front panel
Downloaded from ManualsNet.com
Connections Playback
Front speaker A is used.
Front speaker B is used.
Both front speakers A and B are used.
Display Rear panel
search engine
Settings
Speaker Preset
Two speaker settings can be saved to suit the environments where you
use your speakers.
For example, you can configure two presets easily to switch between
equalizer or speaker settings measured using Audyssey
characteristics of your room differ depending on factors such as whether
you use the screen.
If you want to use a preset, select the preset you want to use and then
configure settings such as Audyssey
save those settings to the preset you have selected.
Preset 1
(Default):
Preset 2:
0 The following settings are saved to presets.
0 "Amp Assign" settings
0 "Speaker Config." settings
0 "Distances" settings
0 "Levels" settings
0 "Crossovers" settngs
0 "Bass" settings
0 "Front Speaker" settings
0 "MultEQ ® XT32" data
0 "Graphic EQ" data
0 This setting also be configured using "Speaker Preset" in the option menu.
(v p. 121)
220
Remote
Tips Appendix
® Setup if the
® Setup or the speaker settings to
Saves the settings to Preset 1.
Saves the settings to Preset 2.
Index