Denon AVC-X3700H Owner's Manual page 55

Contents
Connecting 11.1-channel speakers
This system, which is based on a 5.1-channel system, plays back up to 11.1-channels at the same time.
You can connect speakers for 11-channels for MAIN ZONE by using an external power amplifier.
o Example connection when using two sets of
ceiling speakers
SL
SBL
0 Set "Height" - "Height Sp" to "4ch" in the menu when connecting in this
configuration. (v p. 208)
Front panel
Downloaded from ManualsNet.com
Connections Playback
TRL TRR
TFL TFR
FL FR
SW
SR
C
SBR
Display Rear panel
search engine
Settings
HEIGHT 2 z
TRR TRL
Power amplifier
FRONT FRONT CENTER
SW FR FL C
z You can change the combination of the HEIGHT1 and HEIGHT2 channels in the
settings. (v p. 58)
0 You can connect the external power amplifier to the Front channel instead of the
Height2 channel. Use the "Pre-out" setting in the menu to set the channel
connected to the external power amplifier. (v p. 211)
55
Remote
Tips Appendix
SURROUND SURROUND SURROUND BACK SURROUND BACK HEIGHT1 HEIGHT1
ASSIGNABLE
SPEAKERS
SBR SBL TFR TFL
SR SL
HEIGHT 1 z
Index
ASSIGNABLE