Denon AVC-X3700H Owner's Manual page 201

Contents
0 When performing Audyssey
is automatically saved to "Preset 1" of "Speaker Preset".
0 If Audyssey ® Setup has already been performed, the following "Speaker
Preset" selection screen is displayed.
Select which Preset to use. Preset 1 is already used, selecting
Preset 1 now will overwrite the previously stored setting.
0 See "Speaker Preset" for detailed information on the Speaker Preset
function. (v p. 220)
Front panel
Downloaded from ManualsNet.com
Connections Playback
® Setup for the first time, the measurement data
Audyssey Setup
Preset 1
Preset 2
Analyzing room data
0%
Back
Display Rear panel
search engine
Settings
13
Select "Details" and press ENTER to verify the
measurement results.
Subwoofers may measure a greater reported distance than the
0
actual distance due to added electrical delay common in
subwoofers.
NOTE
0 Do not enable new speakers in speaker configuration menu after Audyssey
Setup. If it is changed, run Audyssey
optimum equalizer settings.
201
Remote
Tips Appendix
® Setup again in order to configure the
Index
®