Denon AVC-X3700H Owner's Manual page 207

Contents
7.1ch + Front B:
Pre Amplifier:
0 When "Assign Mode" is set to "7.1ch + ZONE2", "7.1ch (Bi-Amp)" or "7.1ch +
Front B" in the menu, the assigned channels are output from HEIGHT2
speaker terminals.
0 When Assign Mode is set to "5.1ch (Bi-Amp) + ZONE2" in the menu, the front
channels for Bi-Amp connection are output from HEIGHT1 speaker terminals,
and the ZONE2 channels are output from HEIGHT2 speaker terminals.
Front panel
Downloaded from ManualsNet.com
Connections Playback
Setting to assign the power amplifiers
0
within this unit for connecting the second
set of front speakers.
You can switch between the desired
0
combination of front speakers A and
front speakers B.
Switch the front speaker using the "Front
Speaker" setting. (v p. 220)
You can connect speakers for up to 9.1-
0
channels for MAIN ZONE.
Speakers to output audio are automatically
switched for playing back up to 7.1-
channels in accordance with the input
signal and sound mode.
All of the speakers are connected using
0
an external power amplifier and this unit
is used as a pre amplifier.
Display Rear panel
search engine
Settings
o Floor
Select the floor speakers location.
5ch & SB
(Default):
5ch:
207
Remote
Tips Appendix
This layout combines a surround back
speaker with the basic 5-channel layout.
This is a basic 5-channel layout that uses
front speakers, center speakers and
surround speakers.
Index