Denon AVC-X3700H Owner's Manual page 198

Contents
6
When the following screen is displayed, select "Begin
Test" and then press ENTER.
Start the measurement of the first position.
Audyssey Setup
Select "Begin Test" to start the calibration.
NOTE: You will hear a series of loud chirps starting and stopping
during the tests.
Back
Measurement requires several minutes.
0
NOTE
0 If "Caution!" is displayed on TV screen:
0 Go to "Error messages" (v p. 202). Check any related items, and
perform the necessary procedures.
0 If the volume level for the subwoofer is not appropriate, an error message
is displayed. See "Subwoofer level error message and how to adjust"
(v p. 203).
Front panel
Downloaded from ManualsNet.com
Connections Playback
Ear Height
Begin Test
Display Rear panel
search engine
Settings
7
When the detected speaker is displayed, select "Next"
and then press ENTER.
Audyssey Setup
Speaker Detection
Front
Center
Subwoofer
Surround
Surr. Back
Repeat Last Test
198
Remote
Tips Appendix
:Yes
:Yes
:1spkr
:Yes
:No
Next
Index