Table of Contents
Advertisement
Contents
o Pre-out
When "Assign Mode" is set to "11.1ch", selects the PRE OUT
connector the external power amplifier used in MAIN ZONE.
The PRE OUT connectors that can be selected differ depending on the
combination of "Floor" and "Height" - "Layout" settings configured in
the menu.
This can be set when "5ch & SB" is set for "Floor" in the menu and four
Height and Dolby speakers in total are used.
HEIGHT 2z
(Default):
Front:
z The name of the speaker is displayed that is set for the HEIGHT 2 speaker
terminals by the "Height" - "Layout" setting in the menu.
Front panel
Downloaded from
ManualsNet.com
Connections
Playback
The Height2 left and right pre-amplifier
outputs are connected to an external
amplifier.
The Front left and right pre-amplifier
outputs are connected to an external
amplifier.
Display
Rear panel
search engine
Settings
o View Terminal Config.
This shows how to connect the speaker terminals and PRE OUT
connectors for your "Amp Assign" setting on the menu screen.
211
Remote
Tips
Appendix
Index
Advertisement
Table of Contents
