0 If the input for ZONE2 is set to a specific source (like CBL/SAT), only analog signal or 2-channel PCM signal input (from HDMI connectors or digital connectors (OPTICAL/

COAXIAL)) can be listened to from ZONE2. To playback HDMI signal other than 2-channel PCM in ZONE2, set "HDMI Audio" to "PCM". (v p. 235)

2-channel PCM signals are output from a device connected to the input source selected for ZONE2 and can be played back in ZONE2.

In this case, the MAIN ZONE audio will also be converted to 2-channel PCM signals if the MAIN ZONE and ZONE2 are set to the same input source. However, depending on

the playback device, the playback signal may not be converted to PCM even if this setting is configured.

0 The menu screen is not output in ZONE2.

Front panel

Downloaded from

ManualsNet.com

Connections

Playback

Display

Rear panel

search engine

Settings

152