Updating System Firmware With Ode - HP Visualize c100 Service Handbook

Updating System Firmware with ODE

The Offline Diagnostic Environment (ODE) consists
of diagnostic modules for testing and verifying system
operation. The update utility of ODE provides the
capability of updating the PDC/IODC firmware from
the LIF directory onto the EEPROM.
ODE is an ISL utility. To invoke ODE and bring up the
update utility:
1 Invoke the ISL environment from the system disk.
2 Type ode after the
3 At the
NOTICE: The update command is available only if the
workstation is running HP-UX version 10.0 or
later.
Boot Console Interface Model C160L/160/180/200/240/360
Updating System Firmware with ODE
ISL>
LIF directory on the system disk. The prompt changes to
.
ODE>
prompt, type update to bring up the update
ODE>
utility. The prompt changes to
prompt to invoke ode from the
.
UPDATE>
249