Download Print this page

HP Visualize c100 Install Manual

Hp visualize c100: install guide
Hide thumbs Also See for Visualize c100:

Advertisement

Installing the C Class Disk Tray
Fan Upgrade
HP Part No. A4200-90028
E0197
Printed in USA

Advertisement

loading

Summary of Contents for HP Visualize c100

  • Page 1 Installing the C Class Disk Tray Fan Upgrade HP Part No. A4200-90028 E0197 Printed in USA...
  • Page 2 Hewlett-Packard Co. 1996 Printing History First Printing: January 1997 UNIX is a registered trademark in the United States and other countries, licensed exclusively through X/Open Company Limited. NOTICE The information contained in this document is subject to change without notice. HEWLETT-PACKARD MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MATERIAL INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FIT-...
  • Page 3 Upgrading your C Class Disk Tray Your upgrade kit contains the following: • Disk tray I/O board • Fan Assembly • ESD kit • Upgrade manual NOTE: Installing this upgrade in your C Class system does not affect the regulatory and safety classifications or approvals.
  • Page 4: Preparing Your Workstation

    Preparing Your Workstation Preparing Your Workstation Before starting the upgrade, use the following procedure to prepare the workstation: CAUTION: Before you power down your system be sure to close applications and save any work where applicable. 1 Power off your workstation by pressing the power button on the front panel. When you press the power button, the workstation automatically shuts down the operating system before it powers off the system.
  • Page 5 Preparing Your Workstation 5 Remove the floor stand from the system unit, as shown in Figure 1. Figure 1 Removing the Floor Stand 6 Lay the system unit on a flat surface, such as a table top. 7 Attach a static-grounding wrist strap to bare metal on the back of the system unit.
  • Page 6: Removing The Storage Tray

    Removing the Storage Tray Removing the Storage Tray Perform the following procedure to remove the storage tray from the system unit: 1 Remove the storage tray retaining screw, as shown in Figure 2. 2 If installed, remove any locking device from the storage tray security loop on the rear of the system unit.
  • Page 7: Removing The Disk Interconnect Board

    Removing the Disk Interconnect Board Perform the following procedure to remove the disk interconnect board from the storage tray: 1 Remove the two retaining screws from the disk interconnect board, as shown in Figure 3. Figure 3 Removing the Disk Interconnect Board 2 Disconnect any cables from the disk interconnect board.
  • Page 8 Installing the Fan Assembly and Disk Interconnect Board Installing the Fan Assembly and Disk Interconnect Board Perform the following procedure to install the new fan assembly into the storage tray. The steps in this procedure should be performed in the sequence listed.
  • Page 9 Figure 4 Storage Device Cable Routing 2 Hook the fan assembly into the slots on the storage tray. See 1 in Figure 5. 3 Lay the fan assembly down onto the storage tray. See 2 in Figure 5. 4 If present, reconnect the floppy disk drive I/O cable to the disk interconnect board.
  • Page 10 Installing the Fan Assembly and Disk Interconnect Board 8 Secure the disk interconnect board and fan assembly with the new thumb screws received in the upgrade kit. See 4 in Figure 5. CAUTION: Be very careful not to pinch any cables or wires when securing the new disk interconnect board.
  • Page 11 Installing the Fan Assembly and Disk Interconnect Board Figure 6 Single-Ended and Fast-Wide SCSI Cable Connections 11 Proceed to the section entitled “Replacing the Storage Tray.”...
  • Page 12: Replacing The Storage Tray

    Replacing the Storage Tray Replacing the Storage Tray 1 Slide the storage tray assembly into the system unit chassis, as shown in Figure 5. Figure 7 Installing the Storage Tray Assembly 2 Tighten the storage tray retaining screw, as shown in Figure 5. 3 Reconnect the power cords to the system unit, the monitor, and any peripherals.