Exporting A Project (Export Project) - Roland SP-404MK2 Reference Manual

Configuring the Various Settings (UTILITY)
Pad status
Blinking Project number for which a project hasn't been created (empty project)
yellow
Blinking red Project number to which the imported project is saved
Project number to which the imported project is saved (if a project already exists at that project
Lit red
number, it is overwritten with the newly imported project)
9. Turn the [VALUE] knob to select the project to import, and press the [VALUE] knob.
The project is now imported.
When you import a project to a project number that already contains a project (the pad lights up red), a message is shown
to confirm the overwrite-save.
To import and overwrite, turn the [VALUE] knob to select "OK", and press the [VALUE] knob.
Performing this operation overwrites (erases) the project in the import destination.
Never turn off the power or remove the SD card while the screen indicates "Working...".

Exporting a Project (EXPORT PROJECT)

You can export projects to an SD card if you want to use them on another SP-404MK2.
1. Insert the SD card to which the samples are to be exported into the SD card slot of this unit.
2. Hold down the [SHIFT] button and press the pad [13].
The UTILITY MENU screen appears.
3. Turn the [VALUE] knob to select "IMPORT".
The IMPORT/EXPORT MENU screen appears.
From the top screen, you can also make this screen appear by pressing pad [14] while holding down the [SHIFT] button.
4. Use the [VALUE] knob to select "EXPORT to SD-CARD", and press the [VALUE] knob.
The EXPORT SAMPLE / PROJECT screen appears.
5. Use the [VALUE] knob to select "PROJECT", and press the [VALUE] knob.
6. Press the pads of the projects that you want to export to the SD card.
The pads light up orange.
Pad status
Unlit (dark orange)
Blinking orange
Lit orange
104
Pad for which a project hasn't been created (empty pad)
Pad for which a project has been created
Pad containing a project to be exported to SD card (pad to export)
Explanation
Explanation