Playing Back Samples In Scale Pitches (Chromatic) - Roland SP-404MK2 Reference Manual

Playing Back Samples in Scale Pitches (CHROMATIC)

You can play back samples (changing their pitches) as a chromatic scale with the pads.
1. Press pads [1]–[16] to select the sample to use in chromatic mode.
2. Hold down the [SHIFT] button and press the pad [4].
The unit enters chromatic mode.
3. Press pads [1]–[16].
The pad position corresponds to the key displayed. The sample plays back in the key that matches the pad you press.
Turn the [VALUE] knob to change the key range.
4. To exit chromatic mode, press the [EXIT] button.
Changing how the samples play (how they sound)
You can change how samples play when they are triggered.
1. In chromatic mode, press the [REMAIN] button.
The method switches each time you press the [REMAIN] button.
Method of [REMAIN]
playing button
Blinks slowly
LEGATO
MONO Lights up
POLY Blinks quickly
Changing the scale/mode
You can change the scale/mode that's used when you play.
1. In chromatic mode, press the [VALUE] knob.
The scale/mode changes in the following order each time you press the [VALUE] knob.
Major scale → minor scale → Dorian mode → Phrygian mode → major scale → ...
Hold down the [ROLL] button and turn the [VALUE] knob to select the note (root) for the scale.
When you play legato (by pressing a pad while holding down another pad), portamento is
applied.
The sample plays in single-note mode (monophonic).
Pressing multiple pads makes the samples play back at the same time (polyphonic).
Playing Back Samples (SAMPLE MODE)
Explanation
21