List Of Shortcut Keys - Roland SP-404MK2 Reference Manual

Appendix

List of Shortcut Keys

You can quickly recall a desired function or screen by pressing a button or pad while holding down the [SHIFT] button.
Shortcuts that use the [SHIFT] button
While holding down
the [SHIFT] button
Bank [A/F]–[E/J]
buttons
[COPY] button
[BPM SYNC] button
[LOOP] button
[GATE] button
[ROLL] button
[START/END] button
[PITCH/SPEED] button
[PATTERN SELECT]
button
[REMAIN] button (at
least three seconds)
[EXIT] button
Pad [1]
Pad [2]
Pad [3]
Pad [4]
Pad [5]
Pad [6]
Pad [7]
Pad [8]
Pad [9]
Pad [10]
Pad [11]
128
Function
BANK VOLUME Adjusts the volume for the specified bank overall.
→"Adjusting the Volume for All Banks (BANK
BANK PROTECT This function prevents the samples and patterns assigned to a pad from
being copied, overwritten by editing or accidentally deleted.
→"Protecting a Sample
SYNC ALL Turns the BPM SYNC parameter for all samples in the selected bank on/off.
ON/OFF
PING-PONG Loops the sample by repeatedly playing back forward and then backward.
LOOP
→"Playing Back Samples Repeatedly
GATE ALL Turns the GATE parameter for all samples in the selected bank on/off.
ON/OFF
ROLL SET This shows how to set the roll interval (how fast the roll repeats).
→"Setting the Roll
CHOP Splits the sample at the marker positions, and assigns the resulting samples
to separate pads.
→"Using a Marker to Split and Assign a Sample to a Pad
ENVELOPE Sets how the volume changes when the sample plays back.
→"Making Fade-in/Fade-out Settings
UNDO Undoes the data you just inputted (recorded).
●
Enabled only when recording a pattern
LIVE MODE Use this to disable buttons that are not used when playing live (sampling and
edit-related buttons).
→"Disabling Buttons that Are Not Used When Playing Live (LIVE
STOP Stops the playback of all samples.
→"Stopping All Sample Playback
FIXED VELOCITY Sets the sample's velocity so that it always plays back at 127 (the maximum).
→"Setting a Fixed Sample Volume (FIXED
Pitch or Playback Speed of a Sample
16 VELOCITY Changes a sample's velocity (volume) in steps when it plays back.
→"Changing the Sample Volume for Playback (16
CUE Adjusts the balance of the audio you monitor via the PHONES jack.
→"Monitoring with Headphones
CHROMATIC Lets you play back samples (changing their pitches) as a chromatic scale with
the pads.
→"Playing Back Samples in Scale Pitches
EXCHANGE Exchanges (swaps) the sample or pattern data saved in different pads.
→"Exchanging (Swapping) Samples Between
INIT PARAM Initializes the sample parameters for the selected pad.
→"Initializing the Sample Parameters (INIT
PAD LINK Lets you play back all the pads at the same time that are assigned to a group,
by using a single pad.
→"Playing Back Multiple Pads at the Same Time (PAD LINK
MUTE GROUP Groups together samples that you don't want to play together (samples that
you don't want layered).
→"Preventing Samples from Playing Back at the Same Time (MUTE
GROUP)(P.24)"
METRONOME Turns the metronome on/off.
→"Sampling(P.37)"
Pattern (Real-time
COUNT-IN Adds a count-in before sampling or pattern recording begins.
→"Adding a Count-in Before
Recording a
TAP TEMPO Lets you set the tempo in an intuitive way by tapping the pad in time, as if
you were clapping out the beat.
Explanation
(PROTECT)(P.55)"
(LOOP)(P.15)"
Interval(P.17)"
(ENVELOPE)(P.47)"
(STOP)(P.25)"
(PITCH/SPEED)(P.50)"
(CUE)(P.80)"
"Resampling a Sample
Recording)(P.58)" "Resampling a Pattern
Sampling(P.37)"
Pattern(P.59)"
VOLUME)(P.12)"
(CHOP)(P.46)"
MODE)(P.26)"
VELOCITY)(P.19)" "Changing the
VELOCITY)(P.20)"
(CHROMATIC)(P.21)"
Pads(P.54)"
PARAM)(P.53)"
GROUPS)(P.23)"
(RESAMPLE)(P.39)" "Creating a New
(RESAMPLE)(P.63)"
"Adding a Count-in Before