Creating A New Pattern (Tr-Rec) - Roland SP-404MK2 Reference Manual

Combining Samples to Create a Pattern (PATTERN SEQUENCER)

Creating a New Pattern (TR-REC)

Here's how to create a pattern by setting the sample playback timing at the position you like on the steps.
This method of recording is suitable for creating drum patterns.
1. Press the [PATTERN SELECT] button.
2. Press the [REC] button.
Empty pads in which no patterns have been recorded blink red.
The metronome sounds when the "Metronome:PTN" parameter is "ON", which is the SYSTEM parameter "CLICK(P.109)".
Press pad [9] while holding down the [SHIFT] button to turn the metronome sound on/off.
3. Press pads [1]–[16] that are blinking red to select the record destination pattern.
The unit enters pattern record standby mode, and the RECORD SETTING screen appears.
4. Press the [REMAIN] button.
The pattern recording method switches to "TR-REC".
5. Set the parameters for the pattern.
Controller
[CTRL 1] knob
[CTRL 2] knob
[CTRL 3] knob
[SHIFT] button +
[CTRL 2] knob
[SHIFT] button +
[CTRL 3] knob
[REMAIN] button
6. Press the [REC] button.
TR-REC pattern recording begins.
7. Press pads [1]–[16] while holding down the [SUB PAD] button to select a sample.
8. Set the parameters for the sample to input.
Controller Parameter
SUBSTEP
[CTRL 1] knob
60
Parameter Value
BPM 40–200
LENGTH 1–64
(measures)
SHFL RATE -50–+50
TIME SIGN 1/4–7/4
METRO 0–5
VOL
REC MODE Selects how the pattern sequencer records.
Real-Time
TR-REC
Value
You can split up the steps into multiple and separate units (sub steps).
You can also configure how the split sub steps are played.
* This is enabled when MODE is "TRIG".
Value
1 ON
2 ON
3 a ON
Explanation
Sets the pattern's tempo.
Sets the length of the pattern.
You can set how much to slide the timing of the upbeats (the
strength of the shuffle feel). A setting of "0" results in no shuffle.
Settings in the range of +10–16 generally give a pleasant shuffle
feel.
Specifies the time signature.
Sets the volume of the metronome.
Records in real time.
The [REMAIN] button lights up at this time.
Records using TR-REC.
The [REMAIN] button blinks at this time.
Explanation
Pattern
ON
ON ON