Customizing The Screen Saver; Preparing A Screen Saver Image; Enabling A Custom Screen Saver - Roland SP-404MK2 Reference Manual

Customizing the Screen Saver

You can set your own custom image as the screen saver image.
A maximum of 16 screen saver images can be registered per project.
Steps for using your custom images as the screen saver
You must perform the following operations (summarized) to use your custom images as the screen saver.
1. Create your custom image (
2. Switch the settings to use a custom screen saver (
3. Export the project to an SD card (
4. Save your custom images to the SD card (
5. Load the project from the SD card (

Preparing a Screen Saver Image

Create your custom image in the format shown below.
Format
Image file format BMP
Size 128 (x) × 64 (y) pixels
1-bit, 4-bit, 8-bit, 24-bit
Color depth
●
Note that only monochromatic images can be displayed. Intermediate colors cannot be displayed.
screen_saver_*.bmp
Filename and
Substitute a number (1–16) for the asterisk. The unit does not recognize filenames in any other format. If
extension
the filename is not recognized, the default screen saver is shown.

Enabling a Custom Screen Saver

This shows how you can load a custom image as a screen saver (the "Screen Saver Type" parameter).
1. Hold down the [SHIFT] button and press the pad [13].
The UTILITY MENU screen appears.
2. Use the [VALUE] knob to select "SYSTEM", and press the [VALUE] knob.
The system screen appears.
3. Turn the [CTRL 3] knob to select the "GENERAL" tab.
4. Use the [VALUE] knob to move the cursor to "Screen Saver Type", and press the [VALUE] knob.
The value display is highlighted, and you can now edit the value.
5. Use the [VALUE] knob to select "Custom", and press the [VALUE] knob.
Preparing a Screen Saver Image
Enabling a Custom Screen Saver
Exporting a Project (EXPORT PROJECT)
Saving the Screen Saver Image to a Project
Importing a Project (IMPORT PROJECT)
Specifications
(P.89)).
(P.89)).
(P.104)).
(P.103)).
Customizing This Unit
(P.90)).
89