Roland SP-404MK2 Reference Manual page 129

While holding down
the [SHIFT] button
Pad [12]
Pad [13]
Pad [14]
Pad [15]
Pad [16]
[REVERSE] button +
Pads [1]–[16]
[BUS FX] button
[HOLD] button
[EXT SOURCE] button
[SUB PAD] button
Shortcuts that use the [REMAIN] button
While holding down the
[REMAIN] button
Pads [1]–[16]
CH1: Pad [14]
CH2: Pad [16]
(only in DJ mode)
BANK [A/F]–[E/J] buttons
[MFX] button
[BUS FX] button
Shortcuts that use the [VALUE] knob
While holding down the [VALUE] knob
Effect buttons ([FILTER+DRIVE]–[MFX]
button)
[BUS FX] button
Pads [1]–[16]
Shortcuts that use the [DEL] button
Function
→"Setting the Tempo in Time with the Rhythm (Tap
GAIN Displays the UTILITY MENU > SYSTEM > GAIN tab.
→"GAIN(P.110) tab"
UTILITY Displays the UTILITY MENU screen.
→"Configuring the Various Settings
IMPORT/EXPORT Displays the UTILITY MENU > IMPORT (IMPORT/EXPORT MENU).
→"Importing Samples (IMPORT
(EXPORT
"Exporting a Project (EXPORT
PAD SETTING Displays the UTILITY MENU > PAD SET (PAD SETTING).
→"Configuring the Pad-related Settings (PAD
EFX SETTING Displays the UTILITY MENU > EFX SET (EFX SETTING) screen.
→"Configuring the Effect Settings (EFX
PAD MUTE Switches the pad mute on/off.
→"Muting the Playback of a Sample (PAD
MUTE BUS Temporarily turns off the audio sent to the bus (the sample playback sound or
the sound inputted to the INPUT jack), and outputs only the sound of the
effect.
→"Temporarily Output Only the Effect Sound (MUTE
PAUSE Pauses the sample that's currently playing back.
→"Pausing the Sound of a Sample
INPUT SETTING Displays the input settings screen.
→"Configuring the Sampling Settings (RECORD
PROJECT Displays the SELECT PROJECT screen.
→"Selecting a
Sets which sample playback audio is sent to which bus (meaning which effects are used) for
each sample.
→"Deciding on Effects to Use for Each
You can set the bus to which the CH1/CH2 sample playback is sent (meaning which effects
are used).
While holding down the [REMAIN] button, each time you press pad [14] or pad [16] switches
the effect to use as follows: "BUS-1" → "BUS-2" → "DRY" → "BUS-1".
Sets the bus send destination for all samples in a bank.
Makes the effect edit screen keep displaying.
→"Editing the Effects(P.31)"
You can swap the effects of BUS 1 and BUS 2.
Applies effects only while you hold down the effect buttons (EFFECT GRAB).
→"Turning Effects On/Off at the Desired
Temporarily bypasses BUS 3 and BUS 4.
Selects a sample (no sound is produced).
Also, when the [PATTERN SELECT] button is lit, select a pattern (the pattern will
not be played).
Explanation
(UTILITY)(P.91)"
SAMPLE)(P.101)"
SAMPLE)(P.102)" "Importing a Project (IMPORT
PROJECT)(P.104)"
(PAUSE)(P.25)"
Project(P.83)"
Function (explanation)
Sample(P.29)"
Function (explanation)
Tempo)(P.76)"
"Exporting Samples
PROJECT)(P.103)"
SETTING)(P.92)"
SET)(P.93)"
MUTE)(P.22)"
BUS)(P.33)"
SETTING)(P.35)"
Timing(P.32)"
Appendix
129