Table of Contents
Advertisement
Note:
Use a Hexagon Wrench (2.5mm) for Hexagon screw (A), screw (B) and screw (C).
4.4.11. FULL MIRROR ADJUSTMENT
Purpose:
To set the Full Mirror in the proper position.
Symptom of Misadjustment:
The non-uniformity color will appear.
Adjustment:
Adjust the right and left sides of the screen by adjusting portion (a), portion (b) or portion (c)
and adjust the top and bottom sides of the screen by adjusting back and forth direction.
1. Connect the Personal Computer to the RGB1 IN with the VGA
cable.
- FULL MIRROR-GREEN ADJUSTMENT
1. Supply 100 % Green Signal and project on the screen.
2. Loosen 2 Screws (A) of the Full Mirror Green.
3. Insert a (-) screwdriver into Portion (a) and adjust it so that the
shadow (out of color) area appears on the left or right side of the
screen.
4. Loosen the screw (B).
5. Press Portion (b) of P/S converter alternately and rotate P/S
converter to adjust it so that the edge line of the shadow (out of
color) area can display as clearly as possible.
6. Tighten the screw (B).
7. Insert a (-) screwdriver into Portion (a) and move the Full Mirror
Green in the direction shown by the arrows so that color
Advertisement
Table of Contents
