Table of Contents
Advertisement
Assembly Note:
1. After replacing the Polarizer Unit, Polarizer adjustment is
necessary (Refer to 4.1. Initial Guide Line).
2. Make sure of the Mark color to distinguish the Polarizer Units
(Red, Green, Blue) as shown in
3.4.2. Removal of the Optical Base Unit and Optical Block Unit
1. Remove 4 screws (B) as shown in
2. Lift the Optical Block Unit up to release 4 projections.
Fig.
3-4-2.
Fig. 3-4-2
Fig.
3-4-3.
Fig. 3-4-3
Advertisement
Table of Contents
