LEVEL".
4. Press
or
screen.
4.4.4. WHITE BALANCE ADJUSTMENT
Purpose:
To set the standard white level for each color temperature.
Symptom of Misadjustment:
White will become bluish or reddish.
This adjustment should be done in a darkroom.
4.4.4.1. Rough Adjustment
Note:
This adjustment should be done in a darkroom.
1. Connect the NTSC Video Pattern Generator to the VIDEO IN.
2. Supply Gray Scale Pattern Signal (10 scales) and Project on the
screen.
3. Press
or
"CUTOFF B".
4. Press
or
that the area around 3rdand 4th scale (A) becomes pure gray with
no red or blue tint.
button so that Portion (A) is barely visible on the
button on remote control to select "CUTOFF R" or
button to adjust "CUTOFF R" or "CUTOFF B" so
Fig. 4-4-9