Table of Contents
Advertisement
1. Connect the Personal Computer to the RGB1 IN with the VGA
cable.
2. Supply 70 % Red Horizontal Signal and project on the screen.
3. Press
or
4. Press
or
becomes minimal.
5. Supply 70 % Green Horizontal Signal and project on the screen.
6. Press
or
7. Press
or
becomes minimal.
8. Supply 70 % Blue Horizontal Signal and project on the screen.
9. Press
or
10. Press
or
becomes minimal.
Note:
When the flicker is hard to see in the screen in step 2, 5, 8, press
control to select "BLACK LEVEL",and press
sure to return "BLACK LEVEL" to previous valueafter LCD COMMON adjustment.
4.4.2. SIGNAL LEVEL ADJUSTMENT
Purpose:
To set the optimum signal level.
Symptom of Misadjustment:
The picture will be too light or too dark.
button on remote control to select "VCOM R".
button so that the flicker on the whole screen
button on remote control to select "VCOM G".
button so that the flicker on the whole screen
button remote control to select "VCOM B".
button so that the flicker on the whole screen
or
button so that it appears. However, be
or
button on remote
Advertisement
Table of Contents
