Table of Contents
Advertisement
8. Press
or
blue, green and gray) become minimal. / (Select from2, 3 and 4 in
adjustment range)
After the adjustment, 1 dot vertical line (white) should be
displayed normally.
4.4.5.2.2. METHOD 1 (Fine adjustment): / for PT-L759XU/XE/PT-L1759X
Note:
- VR3509: Main C.B.A.
- For Phase.G.R.G.B. signal, select "/ Phase.G.R.G.B." in "1 color" of
Test Pattern signal.
1. Connect the DVI-D Personal Computer to the RGB1 IN with the
VGA cable.
2. Connect the DVI-D Personal Computer to the DVI-D with the DVI
cable.
3. Supply Phase.R.G.B. Signal by the RGB1 mode and project on the
screen.
4. Press
or
(Display right and left reversely)
5. Press
or
and blue became minimal. / (Select from 2, 3 and 4 inadjustment
range)
button so that all 12 dot interval vertical lines (red,
button on remote control to select "POCK".
button so that 12 dot interval vertical lines of red
Fig. 4-4-14-1
Advertisement
Table of Contents
