Table of Contents
Advertisement
at same time. The cooling fan will change to high speed for
about 10 minutes. (The "C-d" STATUS CODE will be displayed.)
2. Grabbing the handle, place the LCD Projector up on its side as
illustrated.
3. Remove the Lamp cover screws.
First read caution and warning labels on Lamp cover. Then,
remove the Lamp cover screws (2), and take off the lamp cover.
4. Remove the Lamp unit screw.
Remove the lamp unit screw (2), then grasp the Lamp unit handle
and carefully pull it from the LCD Projector. Keep Lamp housing
opening to your right. Do not touch Lamp or point Lamp opening
at anyone.
Fig. 2-4-1
Fig. 2-4-2
Fig. 2-4-3
Advertisement
Table of Contents
