Chapter 2 Setting Up Scan Kiosk Ii; Initial System Startup - Canon Scan Kiosk II Setup And Administration Manual

Chapter 2 Setting Up Scan Kiosk II

This chapter describes how to set up the Kiosk Administrator account upon the first boot up
of the Scan Kiosk II, how to log on to the Windows Admin Mode, enable Auto Login, update
the device certificate, and the Windows Update process.
IMPORTANT
• The operations described in this chapter, must be performed by a Network System
Administrator.
• By default, the device connects to the network using DHCP. If the requirements of the
enterprise require a different network setup to connect the device to the network, such as
802.1x configuration, press [
Welcome screen.
• The Administrator Settings and Maintenance mode can be accessed from the Scan Kiosk II
Windows tablet PC directly or remotely.
2.1

Initial System Startup

This section describes how to enter a Kiosk Maintenance Mode password, assign the
device a name, and select your time zone in which the device is located.
IMPORTANT
The Maintenance mode password replaces the default password for the Kiosk
Administrator (KioskAdmin) account.
1. Power ON the Scan Kiosk II tablet.
For instructions on turning the power ON, see
on p. 19.
The Welcome screen is displayed.
Scan Kiosk II V2.0 Setup and Administrator's Guide
] (Maintenance Mode) in the upper-right corner of the
"Parts and Their Functions,"
25