Verifying The Date And Time - Canon Scan Kiosk II Setup And Administration Manual

4.5.3

Verifying the Date and Time

This section shows how to verify the date and time set on the device.
If you want to specify these settings, you must specify them in the Windows
Maintenance mode.
1. From the Scan Kiosk II Home screen, press [Administrator Settings].
IMPORTANT
The [E-mail] button only appears on the Home screen if an e-mail server has
been configured.
2. Log on to the device as an Administrator.
For instructions on logging on to the device as an Administrator, see
"Logging On,"
Scan Kiosk II V2.0 Setup and Administrator's Guide
on p. 37.
Chapter 3,
229