Table of Contents
Advertisement
2.3
Enabling Auto Login
If you add the Scan Kiosk II to your network domain, change the Kiosk User password,
or change any group policies, it may disable the Auto Login Mode. Perform the steps in
this section to enable the Auto Login Mode.
Auto Login enables you to boot the Scan Kiosk II device directly into the Kiosk Mode.
IMPORTANT
Be careful when you perform operations in the Windows Admin Mode. Any
procedures that are not mentioned in this guide, may disable the Scan Kiosk II device.
1. Log on to the Windows Admin Mode.
For instructions, see
2. From the Desktop, open the [Auto Login] folder.
Scan Kiosk II V2.0 Setup and Administrator's Guide
"Logging On to the Windows Admin Mode,"
on p. 27.
29
Advertisement
Table of Contents
