Table of Contents
Advertisement
4.5.7
Initializing All Settings
This section shows how to initialize (reset) all Scan Kiosk II settings to their default
settings.
IMPORTANT
• This procedure deletes all of the information registered on the Scan Kiosk II tablet
PC, such as user information, address books, and job buttons. Always back up the
data on the Scan Kiosk II tablet before you initialize the settings.
• Do not turn OFF the Scan Kiosk II tablet PC before the initialization is complete.
1. From the Scan Kiosk II Home screen, press [Administrator Settings].
IMPORTANT
The [E-mail] button only appears on the Home screen if an e-mail server has
been configured.
2. Log on to the device as an Administrator.
For instructions on logging on to the device as an Administrator, see
"Logging On,"
Scan Kiosk II V2.0 Setup and Administrator's Guide
on p. 37.
Chapter 3,
243
Advertisement
Table of Contents
