Configuring The System Administration Settings; Specifying The Log On Type - Canon Scan Kiosk II Setup And Administration Manual

4.7

Configuring the System Administration Settings

This section describes how to specify the log on type for users when an authentication
server is enabled, how to test the network connection, and change the Administrator's
password and e-mail address.
IMPORTANT
• You can access the Administrator Settings from the touch panel display, or remotely
from a supported Web browser.
• To access the device remotely from your supported Web browser, enter
https://<device IP address or name>/chorin-webapp/.
4.7.1

Specifying the Log On Type

This section shows how to specify how a user logs on to the Scan Kiosk II device.
There are two log on screen types:
1. List Type:
2. Key-in Type: A user enters their user name and password.
1. From the Scan Kiosk II Home screen, press [Administrator Settings].
IMPORTANT
The [E-mail] button only appears on the Home screen if an e-mail server has
been configured.
Scan Kiosk II V2.0 Setup and Administrator's Guide
A user can select their user name from a list of registered users.
267