Configuring The Job Button Settings; Creating A New Job Button And Specifying The Job Button Settings - Canon Scan Kiosk II Setup And Administration Manual

4.2

Configuring the Job Button Settings

This section describes how to configure the Job Button Settings for the Scan Kiosk II
application.
IMPORTANT
• You can access the Administrator Settings from the touch panel display, or remotely
from a supported Web browser.
• To access the device remotely from your supported Web browser, enter
https://<device IP address or name>/chorin-webapp/.
4.2.1 Creating a New Job Button and Specifying the Job
Button Settings
This section shows how to create a new job button, and specify the job button
settings.
1. From the Scan Kiosk II Home screen, press [Administrator Settings].
IMPORTANT
The [E-mail] button only appears on the Home screen if an e-mail server has
been configured. See
2. Log on to the device as an Administrator.
For instructions on logging on to the device as an Administrator, see
"Logging On,"
102
"Configuring an E-Mail Server,"
on p. 37.
Scan Kiosk II V2.0 Setup and Administrator's Guide
on p. 143.
Chapter 3,